Highlight
•
5.5 Working Days
•
Medical Benefits
•
Shuttle bus provided
Position Objective and Summary
•
The WWTP Process Engineer is responsible for the operation, monitoring, optimization, and continuous improvement of industrial and hazardous wastewater treatment processes at the wastewater treatment plant (WWTP).
•
This role provides technical judgment, process troubleshooting, and engineering support to ensure stable compliance with discharge standards, operational efficiency, and EHS requirements.
Main tasks /Activities / Responsibilities
1. Process Operation and Optimization
•
Responsible for daily operation, monitoring, and optimization of industrial and hazardous wastewater treatment systems.
•
Cover key treatment units, including but not limited to:
•
Physico-chemical treatment: Lamella clarifier, DAF, CAF
•
Advanced oxidation processes (AOP): Micro-electrolysis oxidation, Fenton oxidation, electro-catalytic oxidation, catalytic ozonation, UV photocatalytic oxidation
•
Biological treatment: Anaerobic systems (e.g. UASB, CSTR), aerobic systems (activated sludge, MBR)
•
Tertiary / polishing treatment: MBR, RO
•
Adjust operating parameters based on influent water quality variations (COD, BOD, SS, oil & grease, toxicity, etc.).
2. Technical Evaluation and Process Development
•
Conduct technical evaluation of new incoming wastewater or waste streams and determine suitable treatment routes and pretreatment requirements.
•
Plan, organize, and execute bench-scale tests (e.g. jar tests, pilot trials) to verify treatment feasibility.
•
Provide technical recommendations to support operational decisions and commercial assessments.
3. Troubleshooting and Problem Solving
•
Handle system abnormalities such as effluent non-compliance, biological inhibition, membrane fouling, and process instability.
•
Perform root cause analysis (RCA) and propose corrective and preventive actions (CAPA).
4. Documentation and Technical Management
•
Prepare, update, and maintain SOPs, process operating parameters, and technical reports.
•
Guide technicians and laboratory staff on sampling, testing, and on-site process adjustments.
•
Participate in government inspections, customer audits, and technical discussions.
5. Safety and Compliance
•
Ensure safe operation of chemical systems, advanced oxidation units, and biological treatment processes in compliance with EHS requirements.
•
Participate in risk assessments (RA) and management of change (MOC) reviews.
Job requirements (education, linguistic ability, professional experience, leadership qualities, soft skills etc.)
1. Education
•
Bachelor’s degree or above.
•
Major in Environmental Engineering, Chemical Engineering, Applied Chemistry, Biotechnology, or related disciplines.
2. Professional Experience
•
Minimum 5 years of experience in industrial wastewater or hazardous wastewater treatment.
•
Hands-on operational experience in one or more of the following systems is preferred:
•
Advanced oxidation processes (Fenton, electrochemical, ozone, UV)
•
Biological treatment systems (anaerobic + aerobic, MBR)
3. Professional Competency
•
Ability to independently perform process evaluation, troubleshooting, and operating parameter optimization.
•
Strong understanding of common wastewater quality parameters and their impact on treatment systems.
•
Competent in bench-scale test design and data analysis.
4. Soft Skills and General Competency
•
Good communication skills with operations, laboratory teams, and management.
•
Strong sense of responsibility and ability to make sound technical judgments under abnormal conditions.
•
Able to work in a plant-based, on-site operational environment.
You apply on MyCareersFuture, where this job was posted. Peter Nowak isn’t the employer and doesn’t check listings.